Wyze Cam Floodlight v2 + FREE Color Filters

Note: Wyze Cam Floodlight v2 Color Filters are compatible with Wyze Cam Floodlight v2 and v1 only. This product is not compatible with Wyze Cam Floodlight Pro.

What's in the box:

• Wyze Cam Floodlight v2 Color Filters x 12 6 colors (3500K Warm White, Red, Blue, Green, Cyan, Purple) x 2
• Wet Cleaning Wipe x 2
• Dry Cleaning Wipe x 2

To install your floodlight color filters:

1. Remove all contents from the box (filters and wipes). The installation instructions are printed on the back of the box.
2. Turn off your Wyze Cam Floodlight v2/v1 via the Wyze app. Ensure the floodlight LEDs are turned off and cool to the touch before proceeding.
3. Clean the LED lamps with the include wet wipe, then the dry wipe. Make sure the LEDs are completely dry.
4. Remove the blue film from the filter. Peel the blue protective film from one side of the filter to expose the adhesive.
5. Stick the filter to the LED lamp. Align the filter over the LED lamp and press firmly for 5-10 seconds.
6. Remove the transparent film from the filter.
7. Repeat for the second LED lamp. All done!

To change to a different color:

1. Gently peel off the current filters using the small tab on the filter.
2. Wipe the lamp surface clean with cleansing wipes or other soft cleaning cloths.
3. Apply the new color filter following the installation steps above.

Note: Repeated removal and reapplication of the same color filters will reduce adhesive strength.

They should last multiple seasons.

The color filters are built with durable materials and adhesives designed to withstand outdoor conditions alongside your IP65-rated Wyze Cam Floodlight v2. Under regular use, the filters will last multiple seasons.

Problem

Your Wyze Cam Floodlight v2 Color Filter is unable to be installed.

Troubleshooting

1. Verify that the floodlight is compatible with the color filter accessory.Wyze Cam Floodlight v2 Color Filter is only compatible with Wyze Cam Floodlight v1 and Wyze Cam Floodlight v2.
2. Ensure the steps are being properly followed in our Wyze Cam Floodlight v2 Color Filter Installation Guide.
3. If the filters are not sticking properly:Ensure the LED lamp surface was cleaned and completely dry before applying the filter.Verify that the blue protective film was removed before applying the filter (the blue protective film covers the adhesive side of the filter).Note: Repeated removal and reapplication of the same filter will reduce the adhesive strength.
4. If the wrong color filter was installed:Gently peel off the current filter(s) using the small tab on the bottom of the filter.Clean the LED light surface using cleansing wipes or other soft cleaning cloths. Apply the new filter using the steps in our Wyze Cam Floodlight v2 Color Filter Installation Guide.